LG Appliance Repair Service

Common faults

Warming compartments, water on the floor, a loud or clicking linear compressor, and a slow InstaView ice maker. LG fridges lean on the linear compressor and the sealed system, and both have known weak points.

How we diagnose it

We check the compressor and sealed system, the fans, and the temperature sensors, and read any error on the display before we quote.

How we repair it

We replace a failed compressor, fan, or sensor, recharge the sealed system where needed, and run it until it holds a steady temperature.

Common faults

No drain, a shaking or noisy spin, a door that will not lock, and codes such as IE, OE, UE, or LE. LG front-loaders with Direct Drive still wear the door seal and drain pump.

How we diagnose it

We pull the code, look at the pump, hoses, and door seal, and run a spin so we can see the fault directly.

How we repair it

We clear or swap the pump and hoses, fit a new seal, rebalance the drum, and test a full cycle so it drains and spins clean.

Common faults

No heat, long cycles, a squeal while turning, and codes like dE, tE, or a D90 airflow warning. LG dryers flag a blocked duct fast, and the thermistor and heater are common culprits.

How we diagnose it

We check airflow, the heater and thermistor, the rollers, and the sensors before any parts go in.

How we repair it

We clear the duct, replace the heater, thermistor, roller, or belt as needed, and run a cycle to confirm heat and dry time.

Common faults

Water left in the tub, dishes still dirty, a leak on the floor, and codes such as OE, IE, AE, or LE. LG models with a leak sensor stop the moment they detect water.

How we diagnose it

We trace the leak, test the drain, fill valve, and spray arms, and read what the sensor caught.

How we repair it

We replace a failed pump, valve, or seal, clear the drain and arms, and run a full wash to confirm it drains and stays dry.

Common faults

An element or burner that will not heat, endless clicking, uneven results, and fault codes on induction models. LG induction and radiant tops need the board and elements checked with care.

How we diagnose it

We test the elements or coils, check the switches and wiring, and read any code on the panel.

How we repair it

We replace a burnt element, coil, switch, or board, tidy the wiring, and test each zone for even heat.

Common faults

Not heating to temperature, a door that will not seal, a noisy or silent fan, and F codes on the display. LG ovens with ProBake rely on the convection fan and the sensor working together.

How we diagnose it

We check the temperature sensor, the element or igniter, the fan, and the door seal, then confirm the code.

How we repair it

We replace the element, igniter, sensor, or gasket, recalibrate the heat, and bake-test it to hold the set temperature.